English
IDR
QA-4000

Availability: In stock

Features

Fully automatic drilling for increased productivity and reduced cost

  • Provent Automatic Technology

    • Description

    Automatic Return
    Once drilling is completed and the slug is ejected from the hole., the cutting bit is quickly retracted. This quick drill motor retraction allows the user to move onto the next hole more quickly.    		 Built-in Motion Sensor
    If any lateral movement or excess vibration is detected, both the drill and the feed motor stop. Nitto Kohki is the first company to incorporate this feature into magnetic base drills.
    Self Feeding & Load Detection
    The feeding is controlled by an onboard microcomputer. The feed rate begins slowly and then increases to the appropriate speed for the cutter size and load condition. The load detector clearly shows the amount of resistance on the cutter at anytime.    		 Step Feed
    When cutting through difficult materials, the load sensor will automatically activate the Step Feed Program to help penetrate material.



    Distributor Nitto Kohki, Nitto Kohki Indonesia
    Model
    QA-4000
    Power Source (Single Phase)
    110 - 120 V AC, 50/60 Hz
    220 - 240 V AC, 50/60 Hz
    Electric Drill
    Rated Power Consumption
    680
    Rated Current
    6.1
    3.0
    No-load Speed
    750
    Hole Capacity
    Cutter
    Hole Diamater
    Plate Thickness
    Hole Diamater
    Plate Thickness
    One-touch Type JETBROACH 35L
    12 to 17
    9 to 25
    12 to 17
    9 to 25
    One-touch Type JETBROACH 50L
    17.5 to 40
    9 to 35
    17.5 to 40
    9 to 35
    One-touch Type HI-BROACH 25L
    12 to 55
    9 to 50
    12 to 55
    9 to 50
    Magnet Holding Power
    6664 (680)
    Magnet Dimensions
    82 x 172 mm
    Power Cord Length
    4 m
    Mass
    18.5 kg